Close Menu
Open Menu

The Foundation System

Started from the bottom…

Passive House

The foundation for this passive house consists of a slab-on-grade with a thickened perimeter footing that is thermally isolated from the ground by eight inches of high-density, structurally-rated EPS insulation (R-38). The insulation layer turns up at the edge of the slab and will connect with the above-grade wall insulation, creating a continuous thermal envelope devoid of thermal bridges, a key component of passive house buildings. The Stego Wrap vapor barrier is positioned below the slab and also turns up at the perimeter. It will be taped and sealed to the ZIP sheathing which acts as the air barrier in the walls. This will create an airtight connection between the two assemblies, another pillar of the passive house set of strategies. Additionally, frost protection is provided by five feet of horizontal perimeter insulation; and the entire system sits on a layer of compacted structural fill.

Click the first image below to view a slideshow of images detailing the foundation construction process. And stay tuned for the next blog post which will cover framing, insulation, and air sealing for the walls and roof!

Passive House
The first step was to prepare a well-compacted gravel bed for the foundation system to sit on.
Passive House
With the base completed, formwork could proceed.
Passive House
A pile of high-density EPS (Expanded polystyrene) foam insulation waiting to be installed once the forms were installed.
Passive House
With concrete forms in place, the EPS insulation was installed.
Passive House
With concrete forms in place, the EPS insulation and vapor barrier were installed.
Passive House
Lead Carpenter Steve Ostrand (left) and Operations Manager Ben Blodgett (right) cutting blocks of EPS insulation with a hot knife.
Passive House
The Stego Wrap vapor barrier was taped and sealed at the seams. Note how the vapor barrier wraps up over the EPS curb to have enough slack to seal to the ZIP sheathing later.
Passive House
All pipe penetrations through the vapor barrier were taped and sealed.
Passive House
Once plumbing and radon piping were in place, gravel base was prepared for the concrete slab.
Passive House
Heavy duty steel reinforcement was necessary for this system. Note that the gravel base is absent at the perimeter where the slab will have a thickened edge to support the load of the exterior walls.
Passive House
Finally, the slab was poured and the forms were taken off. (Don’t mind the pine needles – they won’t be included in the final product!)
Passive House
Later in the process, with aluminum flashing over the EPS curb in place, the horizontal perimeter insulation was installed.

Finally, the last step was to cover the perimeter insulation with fill.

Read Our Passive House Series

Back in 2017, we wrote a series of blog posts as we were building a passive house for a client on Mud Lake in McFarland, WI. We invited our readers to join in and follow along with our process of building this passive house—from the foundation to the wall and roof systems and beyond.

TDS Construction Crew Member Framing a High Performance Home Tour TDS Custom Construction’s Latest High-Performance Home Build

Tour TDS Custom Construction’s Latest High-Performance Home Build

Sunday, December 3, 2023, 11 am -1 pm Building resilient…

Sustainable Building & Remodeling

Sustainable Building & Remodeling

Sustainability for your home can mean a lot of things. This blog post breaks it down below into three easily digestible parts: from sustainable remodeling to deep energy retrofits and passive home construction.

Passive House build in Wisconsin with super-insulation, air-tightness, and solar panels to achieve net-zero energy, constructed by TDS Custom Construction. Mud Lake House Update: The Mechanical Systems

Mud Lake House Update: The Mechanical Systems

Follow along for the continuation of this blog series—where we’ll first update you on the mechanical systems (heat and ventilation) that we used for the home, then share some interesting data points on the home’s energy performance.

Written by Christi Weber, Project Designer at TDS and Wisconsin’s first Certified Passive House Consultant.  She has been in the design field for 10 years, specializing in residential projects, Passive House, Net-Zero and High Performance homes.

Published on Nov 01 2017

Last Updated on Dec 21 2023

Categories: Passive House

Tags: energy efficiency, foundation, insulation, new construction, new home building, passive house, zip sheathing